1. Run Tech2WinAutoInstall.exe, Everything will be done.
   2. install VX Manager.
   3. Open VX Manager, install GM Driver.

1. Install VMware-player-6.0.6-2700073.exe
   2. copy GDS2 VM to harddisk.
   3. open GDS2 VM with VMware Player

http://www.mileageprogrammer.com/readwrite-audi-a4-eeprom-hc12-mileage/

1. Programming & Installation of new ECUs……….worked!
   (PCM, ABS, Instrument Cluster, Air Bag, Fuel Pumps, etc.)……….worked!
2. Live Data-stream with Recording & Playback Functions for main ECUs……….worked!
3. Read & Clear Diagnostic Trouble Codes (DTCs)……….worked!
4. Set, Adjust or Remove Speed Governors……….worked!
5. Automatic vehicle recognition……….worked!
6. New Software Re-flash for Existing ECUs……….worked!
7. All Other Dealer Functions……….worked!
8. Steering Angle Resets………………….worked!
9. Guided Fault Finding………………….worked!
10. Program New Keys………………worked!
11. DPF Regeneration………………worked!
12. Brake Bleeding………………………………..worked!
13. Injector Coding……………………………………..worked!

Src:

http://blog.obdexpress.co.uk/2018/06/22/ford-mazda-ids-109-download-100-tested/

There are a lot of Xentry PassThru questions frequently asked and answers given by users and folks in http://mhhauto.com/ Hope it helps.

All PassThru versions works as good and as same as SDconnect C4 units?

- for xentry, i check all diag files are identical with open shell.
- for das, it is not as complete as openshell with sd4. see note above.
passthru limited to obd2 vehicles only, pkw,transp, smart.
- passthru device can't be used with vediamo and dts monaco.

Could you explain this a little more: "install block check keys to daimler server"?

from old crack:

Code:

C:Program FilesMercedes-Benzxentryfusokoeclipseplugins
Rename File
From
com.daimler.xentry.diagservice_1.6.0.201608011018.jar
To
com.daimler.xentry.diagservice_1.6.0.201608011018.jar.DELETE

now its other version number
also block starkey center
host file:

Code:

127.0.0.1       openshell.aftersales.daimler.com
::1             openshell.aftersales.daimler.com

Thisis pass thru version is there a other version for diagnose for pass thru device???

so 1 dvd diagnose other dvd for programming?

only 1 dvd mate. Sdflash folder for programming is include in it.
the using of xentry passthru version is like the xentry open shell version only it is using passthru devices.

Xentry Internal Error (3.17)-3.175 "no access authorization code" after xentry diagnose while onlineCOPY C:ProgramDataLicDirlic_key_2.dat to the desktop, rename it to lic_key_2.x4711, and make this file READ ONLYMOVE it back into the directory C:ProgramDataLicDir. make sure the lic_key_2.dat file IS NOT read only while lic_key_2.x4711 file READ ONLY...

DAS license 0 day, how to do?

extract and copy this to dasbin:

DAS license 0 day error fix for passthru.rar

Xentry Passthru Model covered?

Pretty much all can vehicles. Works great with Xentry vehicles. So I would say Xentry Passthru is good for 2006 and up.

Passthru Models are only from EURO5 Vehicles (for Europe)

IMPRORTANT:

Tips and guides for DAS/Xentry users: How to use Xentry Passthru

Look here: http://blog.obdexpress.co.uk/2018/03/21/how-to-use-xentry-das-passthru-j2534/

Newest DAS/Xentry: 07.2018

Look here: http://www.obdexpress.co.uk/wholesale/2018-07-mb-sd-benz-c4-software.html

Src:http://blog.obdexpress.co.uk/2018/07/11/xentry-passthru-questions-and-answers/

Free download Jaguar and Land Rover SDD 154 software and patch:

Link 1: Jaguar and Land Rover SDD 154 software from the dealer

http://diagnosticdelivery.jlrext.com/idscentral

Link 2: JLR SDD 154 patch from obdexpres.co.uk

a mega link will be updated here

https://mega.nz/#!e90y0CgL!rCGfE1c7tSqxlqhSpKCqU7-VeOQmb_3bbNOm704jX74

Date: 22-08-2018

Version: SDD 154

Password: Not required

Activation: Crack sw - no need activation

Operation System: Windows 7 32bit

Video:  JLR SDD 154 Windows 7 Install

updating..

Test Report:

Confirmed to work with diagnostic tools for Jaguar and Land Rover which works with SDD v139 v141 v142 v145....

Mangoose Pro cable: confirmed!

Vxdiag VCX Nano Jaguar & Land Rover: confirmed!

JLR VCI: confirmed! (install sw and patch, then connect to the car...driver will be installed automatically)

IMPORTANT:

JLR DoIP VCI: works with SDD 06-2016 and Pathfinder diagnostic software 2017

VCM 2 clone: in theory,  SDD V154 should work with VCM 2 clone. Professionals have not tested yet. But VCM2 JLR SDD 154 test result will be updated here.

Test Result: JLR SDD 154 software works like a charm!

source:http://blog.obdexpress.co.uk/2018/08/24/free-download-jlr-sdd-154-software-patch-100-tested/

Free download Jaguar and Land Rover SDD 154 software and patch:

Link 1: Jaguar and Land Rover SDD 154 software from the dealer

http://diagnosticdelivery.jlrext.com/idscentral

Link 2: JLR SDD 154 patch from obdexpres.co.uk

a mega link will be updated here

https://mega.nz/#!e90y0CgL!rCGfE1c7tSqxlqhSpKCqU7-VeOQmb_3bbNOm704jX74

Date: 22-08-2018

Version: SDD 154

Password: Not required

Activation: Crack sw - no need activation

Operation System: Windows 7 32bit

Video:  JLR SDD 154 Windows 7 Install

updating..

Test Report:

Confirmed to work with diagnostic tools for Jaguar and Land Rover which works with SDD v139 v141 v142 v145....

Mangoose Pro cable: confirmed!

Vxdiag VCX Nano Jaguar & Land Rover: confirmed!

JLR VCI: confirmed! (install sw and patch, then connect to the car...driver will be installed automatically)

IMPORTANT:

JLR DoIP VCI: works with SDD 06-2016 and Pathfinder diagnostic software 2017

VCM 2 clone: in theory,  SDD V154 should work with VCM 2 clone. Professionals have not tested yet. But VCM2 JLR SDD 154 test result will be updated here.

Test Result: JLR SDD 154 software works like a charm!

source:http://blog.obdexpress.co.uk/2018/08/24/free-download-jlr-sdd-154-software-patch-100-tested/

Scania VCI3 SDP3 software update to v2.39.1, here, Obdexpress.co.uk shares some tips of Scania SDP3 v2.39.1,incl:how to install, activate and crack Scania SDP3 v2.39.1 on Windows 7 32 bit ...

THE MOST IMPORTANT:

you should have functional SDP3 v2.39.1 software for Scania VCI 3:

https://share.weiyun.com/5gC8I8y (password: 5g4dh4)

or http://www.obdexpress.co.uk/wholesale/scania-sdp3-diagnosis-programmer-software.html (no pass)

(This software does not need shipping, after your order, our engineers will help install and activate by TeamViewer.
)

Scania SDP3 V2.39.1 Confirmed:

Check and adjustment
Conversion
Maintenance
Campaign
Bodywork
Fault Codes
Fault Reporting
Programming of Control units

operating system:

SDP3 2.39 works well on Windows 7 32 bit

(confirmed by pros at obdexpress.co.uk)

Video demo:

steps:

then you will have all files for installation

Step 1: install Adobe Reader

Step 2: install Microsoft .NET

Step 3: install sdp 3 v2.39 application

Step 4: run prerequisites (sdp 3 patch) as an administrator

PC restarts

Step 5: run x32 Windows command script

(install the driver software anyway)

Step 6: activate sdp3 2.39 with hardware id

copy hw id for activation

then will get an activation file

merge - success

copy SCOMM_SSK.dat and SCOMM_SSK_HL.dall

open SDP3 Properties - open file location - copy and replace files

Step 7: crack SDP3 software

PC restarts

Step 8: select a setup language in SDP3 configurator

Step 9: run SDP 3 and update Scania VCI

Now, Scania VCI3 SDP3 2.39 is ready for use!

Source:http://blog.obdexpress.co.uk/2019/04/29/scania-sdp3-v2-39-1-download-install/

ODIS 5.1.3 PostSetup 86.0.10 is available to download and compatible with VCX NANO 5054, VAS5054A and VAS6154.

1. ODIS 5.1.3 PostSetup 86.0.10 for VAS5054A and VAS6154:

You want to try to install the odis 5.1.3 by yourself, you can get the link of odis 5.1.3 software here.

ODIS 5.1.3 and postsetup + Flashdata without the activation files.

https://mega.nz/#F!xB8wHIRD!JyYLxBi-ktDbPSOhkWUjnQ

https://mega.nz/#!G1pknSZJ!YL35mSvqviDEMrSZz12C-6ctAs7TQ275Ah10CKFkZ_Y

Tips: It is free source, so you have to try it at your own risk.!!!

Stable version ODIS V4.4.1:

http://www.obdexpress.co.uk/wholesale/vas-6154-odis-diagnostic.html (VAS6154)

http://www.obdexpress.co.uk/wholesale/vas-5054a-vw-audi-bentley-lamborghini-multi-language-diagnostic-b.html (VAS5054A)

2. ODIS 5.1.3 PostSetup 86.0.10 for VCX NANO 5054:

Software supplier: http://www.vxdiag.net

VCX NANO 5054 interface + software supplier:

http://www.obdexpress.co.uk/wholesale/vxdiag-vcx-nano-odis-support-uds-protocol-wifi-version.html

Size: 2TB disk

Programming...confirmed

Coding ...confirmed

Programming key ...confirmed 

Coverage: 2001 -2018 year

Operation system:

WIN7: good

win10: good

Win8: not good

Multi-language is available:

ODIS 5.1.3 Installation:

Same as ODIS V4.4.10

http://www.vxdiag.net/wiki/en/#!pages/Volkswagen/ODIS_Install/index.md

Tip:

It is recommended to open the automatic installer with administrator privileges.

ODIS 5.1.3 Software Functions:

- Estimated remaining times are shown for ECU flash operations.

- Diagnostic protocol contains interruptions of GFF sessions, extended measurement values, improved ECU communication view, used diagnostic hardware, connection type of diagnostic hardware, operating system, the hotfix used and submissions of support requests

- The measured value display has been improved.

- Documents in GFF are displayed in separate windows.

- One message box will be shown at the beginning of the test drive mode.

- GFF hotfixes can be integrated during diagnostic sessions.

- Danger messages have been revised.

- Stopping of diagnostic sessions may be interrupted.

- Automatic deletion of autosave diagnostic protocols after successful transmission.

- Selection of PassThru diagnostic hardware has been improved.

- ODIS Service Software update has been stabilized.

FAQ:

Q: Downloaded vxdiag ODIS 5.1.3 to install and get the following error, I exit the software, reboot the computer, got the same error.

A: The computer has no big enough storage.

It needs 29.1GB.

More info will be continued.

ODIS 5.1.3 PostSetup 86.0.10 tech support is available at www.obdexpress.co.uk

http://blog.obdexpress.co.uk/2019/06/01/odis-5-1-3-postsetup-86-0-10-launcher/

V2018  Actia Multi Diag arrived at obdexpress.co.uk, here we'd like to share the free download links and installation method:

Actia 3.2018 43.06: https://mega.nz/#!QNskhKqY!q93QYap0xNayDMhO1Y0DRpf_OkpkYJQEgC0vnrPzfOM

CRACK FIX: https://mega.nz/#!YYhwGSKb!hAQaG7RunQLdoG7njQ1-FLp7HiYLX0CYqe53kEOrEXY

older version Actia 1.2018 42.09: https://mega.nz/#!croCEKIQ!7PHYKUAWkVqKBfc1DTzmQtJUEcYx9iQ0KsNLXrYi2ew

VCI 033918

Security: unknown, not tested by professionals yet

Good to know: you need luck with actia multi diag interface china clone

For sake of security and convenience, you'd better to have actia reliable

here are all tested versions, confirmed to work perfectly

actia multi diag 2018:

http://www.obdexpress.co.uk/wholesale/multi-dig-access-j2534-pass-obd2-diagnostic.html

actia multi diag 2016:

http://www.obdexpress.co.uk/wholesale/multi-diag-access-j2534-pass-thru.html

actia multi diag 2015:

http://www.obdexpress.co.uk/wholesale/i-2015-multi-diag-access-j2534-pass-thru-obd2-device.html

actia multi diag 2014:

http://www.obdexpress.co.uk/wholesale/multi-diag-access-j2534-pass-thru-obd2-device-obd2express.html

actia multi diag 2013:

http://www.obdexpress.co.uk/wholesale/2013-ii-multi-dig-access-j2534-pass-thru-obd2-device.html

actia multi diag 2011:

http://www.obdexpress.co.uk/wholesale/multi-dig-access-j2534-pass-thru-obd2-device-2032.html

FACT:

It works with any Actia interface either genuine or clone as long as the PIC chip is flashed properly. For 1st generation yellow you need to reflash PIC12F629 (link for guide bellow), as for 2nd generation XS 2G (silver/black) you need to reflash 16F630 (I will look for a guide for this one). They all use the same software and drivers from this INFO file. I went from a clone 1st gen to a genuine 2nd gen on the same laptop, same software without changing anything. I strongly advise people to buy a genuine 2nd gen since it's got a powerful program behind with all functions and furthermore you can use it as a Passthru device (it has J2534-1 and J2534-2) with various dealer software. You hit 2 birds!

First of all, you must modify or buy a modified clone. The procedure is the same on all Actia devices, either clone or genuine or 1st or 2nd generation.

1st generation yellow VCI: Link for guide if your chip PIC12F629 is not modified : https://mhhauto.com/Thread-Multidiag-2017-III-SP4-Hex-for-Pic

2nd generation silver XS 2G: I did not find a proper guide now, all I know is that you have to reflash PIC16F630.

Installation instructions:

- WORKS ONLY ON 32BIT (TESTED ON WINDOWS 7 SP1 X32)

@@@@@@@@@@INTERNET MUST BE OFF@@@@@@@@@@@

1. run ACTIA_NET_BLOCK.bat (Run as administrator if possible)
2. run Activation MAJ MD 033918/keyUpdate (Run as administrator if possible)
3. Install Actia Multidiag Standard Profil (if the case, use S/N: 033918 instead of xxxxxxx) (I selected country: France and simply changed language after installation)

RESTART COMPUTER after installation finished

3. Go to C:ACTIAPortal
4. Remove Wget.exe
5. Go to control panel -> uninstall or change a program -> there are 3 drivers made by ACTIA. Remove all 3 drivers.
6. Install I+ME-Actia-PassThru-XS2G-Driverpack-2.8.1.14.exe

Then: (supplier told me it is optional, I have done it anyway)

1. Go to C:ACTIAPortalchromemultidiagcontentscripts
2. Open in a text editor file multidiag.js
3. Go to line "var showWarningPT1Window=true" and make this line like
4. "var showWarningPT1Window=false"

Then: Run the application, connect VCI to car and to laptop's USB, try to make a diagnostic on a car and it should detect a new hardware. If it does not recognizes it, then you have to update it manually via Start menu->right click on computer->Manage->Device Manager->Other devices->Right click on Unknown device->Update driver software->Browse my computer for driver->"C:ActiaDrivers VCIPT1G"

If you want to update from older version, simply uninstall old version and make sure you follow the steps again completely (including removing the 3drivers)

Note: it should appear each time when you diagnose that your VCI is old and blablabla, just click continue and it connects to the car

Note2: My supplier told me that it might not be 100% compatible with all cars as it is the old interface and does not do the multiplexing like the newer one. I tested on a few cars from 2000 to 2015 and for 300euro it is worth adding to collection!

Note3: On 2nd gen XS 2G it should be recognized it automatically, it will not display any messages and will work much faster and stable.

FOR FURTHER COMPATIBILITY WITH HONDA HDS, JLR SSD, NISSAN CONSULT, TOYOTA TECHSTREAM ETC.                    Visit fantomel's collection:

ACTIA-MULTIDIAG PART1:

https://mega.co.nz/#F!XYQ0FBBI!eW_ZAaLsrK1VHfHPdQAwGA

1. Actia Multi-Diag I 2009 v.16.21
2. Actia Multi-Diag I 2010 v.19.10
3. Actia Multi-Diag III 2010 v.21
4. Actia Multi-Diag II 2011 v.23.07 + Vivid WorkShop
5. Actia Multi-Diag III 2011 v.24.01 + Service Pack 3 v.24.31
6. Actia Multi-Diag I 2012 v.25.13
7. Actia Multi-Diag II 2012 v.26.08.1 + Service Pack 2 v.26.25 + Vivid WorkShop
8. Actia Multi-Diag III 2012 v.27.06 + Service Pack 2 v.27.21 + Vivid WorkShop
9. Actia Multi-Diag I 2013 v.27.31 + Vivid WorkShop
10. Actia Multi-Diag II 2013 v.28.08 + Service Pack 1 v.28.11
11. Actia Multi-Diag III 2013 v.29.04+Service Pack 1 v.29.11+Service Pack 2 v.29.21
12. Actia Multi-Diag IV 2013 v.30.06+Service Pack 1 v.30.11+Service Pack 2 v.30.21
13. Actia Multi-Diag I 2014 v.31.09+Service Pack 1 v.31.11+Service Pack 2 v.31.21 + Vivid WorkShop
14. Actia Multi-Diag II 2014 v.32.05+Service Pack 1 v.32.11
15. Actia Multi-Diag I 2015 v33+Service Pack 1 v.33.11+Service Pack 2 v33.21+Vivid WorkShop
16. ALL KEYGENS FROM v.19 TO v.32

ACTIA-MULTIDIAG PART2:

https://mega.co.nz/#F!WUEnXK7I!M8Wg4MHBX0jLFTeRBoXz1w

17. Actia Multi-Diag CD versions 6.1,6.3&7.3
18. Actia Multi-Diag Trucks 2011
19. Actia Multi-Diag I 2015 v.33.06+Service Pack 1 v.33.11+Service Pack 2 v33.21+Vivid WorkShop + KG
20. Actia Multi-Diag II 2015 v.34.07+Service Pack 1 v.34.11+Service Pack 2 v.34.21
21. PassThru programs,drivers and instructions on how to install them.
22. Added Original MDO adapters pinouts

[Image: 105zjlt.png]

23. Actia Multi-Diag III 2015 v.35.09+Service Pack 1 v.35.11+Service Pack 2 v.35.21
24. Actia Multi-Diag I 2016 v.36.05+Service Pack 1 v.36.11+Service Pack 2 v.36.21+Service Pack 3 v36.31+Service Pack 4 v36.41
25. Jaltest Trucks that has same interface as Actia Trucks versions 2013.3.1.1 and 2014.1.1.1

note: read the pdf files to know your tool better and to make proper choices, specialy for passthru programs.

password if needed: fantomelthanks to fantomel, bouizanne, zdsSF, Twist

source: https://mhhauto.com/Thread-ACTIA-MULTI-DIAG-COLLECTION-2009-2010-2011-2012-2013-2014-2015-2016

Just in case, be sure you have these programs as well.

https://support.microsoft.com/en-gb/help/2977003/the-latest-supported-visual-c-downloads

https://download.microsoft.com/download/6/E/4/6E48E8AB-DC00-419E-9704-06DD46E5F81D/NDP472-KB4054530-x86-x64-AllOS-ENU.exe

https://java.com/en/download/manual.jsp

Final note:

As a personal experience, the 1st generation Actia is quite limited on newer Euro5+ cars, used on a variety of cars.  But for example it was the only one that could adapt pilot injection on a peuget boxer 2.2hdi among genuine delphi,kts,launch; on a BMW F30 328i it had all the functions and parameters as other testers I own. The second generation though it is something else. It connects much faster and you feel safe working with it.

http://blog.obdexpress.co.uk/2019/06/17/download-installv2018-actia-multi-diag/

Volvo Prosis Offline 2019-1-15 Newest Release:

Prosis NT Offline

Data in this release is extracted 2019-01-12

Added model / component variants in this release:

EC15E

EC18E

EC20E

ECR18E

EC750E HR

EC200E

EC200E L

EC200E NL

Volvo Prosis Offline 2019 setup video

volvo prosis offline version download:

1. Free mega link

https://mega.nz/#!7B9jiIwC!PnsOXYedWdBaheR6TugKm7M-FWHgUamHJwEv_TPF65E

https://mega.nz/#!rNtxAAiK!6fF8rN_w4Wf50Jav0Ip3nfNnv91D_-1R_yzz8Um76hQ

https://mega.nz/#!aBshFCAR!lieVuJveET8SuvM9TayctsgHpFy3k8giakurKsaDi_o

https://mega.nz/#!WAkVgYyC!Qv9ek3eyBbkOPsY2-7KppxLsOUJwNXDy1yDfBhhGOCA

https://mega.nz/#!zZ9FjKDB!mToivnRUWpkOCmKnxTdtY6mb3BXJESVOPzCywlW1RhQ

https://mega.nz/#!qE1FBa5T!qAdPd6WTjjHtwAABnon-bV-H-iikOWkQQClKzF3THA0

https://mega.nz/#!GV8lBSYa!V6L2ZEu__ZWwh02BSETbLJfyGNFOCI_uDT0AIZkGyrM

Security: Unknown

2.Reliable and tested source

http://www.obdexpress.co.uk/wholesale/volvo-prosis-2013-parts-repair-20636.html

Security: 100% yes

The info of older versions

1. Prosis Offline 2017 Release:

Prosis NT Offline

Data in this release is extracted 2017-04-15

Added model / component variants in this release:

A60H

D2.6D

D3.8E

EC210D L

EC210D LR

EC60D

P4410B

P4820D

Volvo Prosis Offline 2013 release

Prosis Offline 2013 Release:

Prosis NT Offline

Data in this release is extracted 2013-01-05

Main changes in this release:

- Misc. updates.

Added model / component variants in this release:

-Pl4808D

-EC700C HR

-SD75

-D1.8A

- Dieselmax 444

Volvo Prosis Offline 2013 setup video

https://www.dailymotion.com/video/x249e00

Remember set the HD quality to 720, so that you can watch this video clearly.

Enjoy.

1. Hold on the start button, ready to connect the power supply.

2. Hold on this button, connect the power supply, the power light on, wait for 10 seconds.

3. When all the lights turn on, release the button and the machine enters the recovery state.

4. Connect the USB cable to the computer, ready to recover.

5. Open GM MDI Manager and choose “Recover”

1. Reset computer time/date

Offer odis 5.1.5 postsetup 89.0.50 free download source and Win7 setup, VAS5054 and VXDIAG Nano diagnosis via Bluetooth & USB successfully.

odis 5.1.5 postsetup 89.0.50 + Launcher free download:

https://share.weiyun.com/5QR2p9C

Password: stbtl4

Security: 100% Yes

Uploaded by: engineer from obdexpress.co.uk

Works with VAS5054 or VXDIAG Nano

ul.to links of ODIS 5.1.5 Postsetup 89.0.190

part01. http://ul.to/5bhffifw

part02. http://ul.to/52n3qvpu

part03. http://ul.to/9jyp97n9

part04. http://ul.to/qb5ljjhv

part05. http://ul.to/uf6blb3c

part06. http://ul.to/oy2if4za

part07. http://ul.to/acvk4naj

part08. http://ul.to/ct2yfa8h

part09. http://ul.to/dwjcdorm

part10. http://ul.to/nprkdqd1

part11. http://ul.to/7l2tg4t2

part12. http://ul.to/7samci17

part13. http://ul.to/gulw68ju

part14. http://ul.to/npuxotta

part15. http://ul.to/9y4w5zr5

part16. http://ul.to/ko0bnkkr

part17. http://ul.to/6yk97ja8

part18. http://ul.to/9yas3gua

part19. http://ul.to/i2r6xfqr

part20. http://ul.to/d0ofpacm

part21. http://ul.to/7lzsbkxb

part22. http://ul.to/7kdgq99v

part23. http://ul.to/0j17g6z7

part24. http://ul.to/qh68z3rd

part25. http://ul.to/fvdv252d

part26. http://ul.to/jzkegf56

part27. http://ul.to/k2ca1jxe

part28. http://ul.to/zrkeatkh

part29. http://ul.to/pnudu2bi

part30. http://ul.to/y6kt0ypo

part31. http://ul.to/58paytka

ODIS 5.1.5 Postsetup 89.0.190 win7 setup + VAS5054 diagnose VW Passat 2007 via Bluetooth and USB:

Windows 8 10: try at your own lucky.

Language: Multi-lingual

Main Steps:

1. Copy ODIS 5.1.5 data and Postsetup from the CDs to the computer.
2. Open "0.DTLite4454-0314" to install DAEMON Tools Lite.
3. Open "Windows update" to complete installation.
4. Open "OffboardDiagSetup" to complete installation.
5. Open "License Launcer Plugins", right click on "OffboardDiagLauncher " to select "Copy" and replace. And Open "Plugins" to replace "De.volkswagen.odis.vaudas.launcher_4.51.2".
6. Open "Offboard Diagnostic Information System" to download 475 files ODIS. data etc.
7. Install Patch for ODIS 5.1.5.
8. Ensure if ODIS running with VAS5054 /VXDIAG NANO establish a good communication with the computer.
9. Diagnose VW Passat 2006 USA /CAN 2007(07) via Bluetooth & USB.

VAG Coverage:

Audi 2019.05.01

Skoda 2019.03.00

Bentley: 2019.02.00

Bugatti: 2019.02.00

Lamborghini: 2019.03.00

MAN: 2019.08.00

Volkswagen Nutzfahrzeuge:2019.08.01

Seat: 2019.06.00

Volkswagen PKW:2019.08.00

You can contact us to get VAS5054 Better Price:

Email: sales@OBDexpress.co.uk

Skype: obd2express.co.uk

WhatsApp: +86-18750906257

Source:http://blog.obdexpress.co.uk/2019/09/12/odis-5-1-5-postsetup-89-0-50-launcher-download/